Lock the bed closed before the mattress comes out, release the springs or gas pistons in the right order, unbolt the cabinet from the wall, repair the anchor holes and book reuse or bulky collection.
To dispose of a Murphy bed in Dubai, close the bed and strap the frame to the cabinet, then remove the mattress. Release the springs or gas pistons following the manufacturer's sequence, unbolt the frame and cabinet from the wall, bag every fixing and book confirmed reuse or accepted bulky-furniture collection.
A wall bed looks like a wardrobe and behaves like a machine. Inside the cabinet is a counterbalance, either a bank of steel coil springs or a pair of gas pistons, that lets one person raise a heavy frame and mattress with a light push. That stored force is what makes a Murphy bed easy to use and what makes it risky to take apart in the wrong order.
Wall beds are common in studios and compact one-bedroom units, and in furnished apartments they are often part of the landlord's fitted furniture. Check the tenancy contract and the move-in inventory before arranging anything. If the bed is listed there, removing it without written approval can turn into a deduction from the security deposit, even if the bed was old and creaking.
Then identify the mechanism. Open the bed and look at the side panels of the cabinet. Long coiled springs hooked onto a steel bracket mean a spring system, often with an adjustment bolt per side. Slim cylinders that look like car-boot struts are gas pistons. A sticker inside the cabinet usually gives the brand and model, which is enough to find the dismantling instructions.
The counterbalance is set for a frame plus a mattress. Lift the mattress off an open bed and the empty frame can swing upward with real force, and gas pistons can do the same. Raise the bed to the closed position first, engage any safety lock, and run two ratchet straps around the frame and the cabinet carcass so it cannot drop open or flip up.
Only then work the mattress out. On many models it is held by a strap or a hinged retaining bar along the foot; release that, lower the bed slowly with someone holding the frame, and slide the mattress off sideways. Wall-bed mattresses are usually thinner than standard ones and can be handled like any other mattress collection.
If the mattress is already out and the frame is down, keep weight on it and close it slowly with two people. Spring hooks and piston brackets come off only in the order the manual gives, with the frame secured, never by cutting or prising them free.
Spring systems are usually de-tensioned by backing off the adjustment bolt on each side, then unhooking the springs one at a time. Piston systems are unbolted at the frame end and then at the cabinet end. If there is no manual, or the springs are rusted onto their hooks, stop and have a fitter or an experienced crew handle it. Mark each side, bag the springs or pistons, and tape the bags to the matching side panel.
With the mechanism out, the frame comes off its pivot and the cabinet can be unbolted. Wall beds are fixed to the wall with heavy brackets and anchors because the open bed pulls forward on the cabinet. Remove the screws, lift the carcass off its brackets with two people and leave the brackets on the wall until the cabinet is clear. Most frames and side panels then split into flat sections that fit a service lift.
Removing the brackets leaves large anchor holes, often in a load-bearing block or concrete wall. Fill and sand them and touch up the paint before the landlord's inspection, or ask the building's maintenance team what they accept. Book the service lift and check whether the building needs a furniture move-out permit for parts leaving the unit.
A working wall bed with its manual, all springs or pistons and an undamaged cabinet can go to resale or to someone fitting out a small flat, provided they understand it needs proper wall anchoring. Beds with bent pivot arms or worn springs belong in bulky-furniture collection. Our furniture removal team dismantles wall beds in Business Bay studios. See also bed frame disposal and sofa beds.
Often, if it is dismantled carefully and every spring, piston and fixing is kept. The new wall must be able to take heavy anchors, and the counterbalance may need re-adjusting for a different mattress. Many owners find the cost of refitting close to a new unit, so check before deciding.
The springs or pistons are sized to lift the frame and mattress together. Without the mattress's weight the counterbalance overpowers the frame. Close it slowly with two people, strap it to the cabinet and do not try to hold it down on your own while removing parts.
They hold pressurised gas, so do not drill, cut or heat them. Unbolt them intact once the frame is secured and keep them together with the bed parts. Mention them when booking so the collector routes them with the metal rather than crushing them with general waste.
Send photos of the bed open and closed, the mechanism inside the side panels and any attached shelving or desk. Say whether it is a spring or piston model, whether the mattress is going, the floor, service-lift and parking access, and whether the wall needs making good.
Send photos of what you need cleared on WhatsApp. Our team provides an instant, fixed upfront rate and handles elevator bookings and gate security smoothly.
Specialists in residential and commercial clearances across Dubai since 2016. Committed to safe property handovers, compliant electronic waste disposal, and municipal green waste diversion.
From single furniture pickups to complete villa cleanouts across Dubai. Professional, uniformed, and on time.
